Particularly in developed places, digging the ground is no longer an ordinary job. It needs accuracy and care since utility pipes and cables are lying underneath. Your chances of reaching underground utility pipes are high if you do so without adequate preparation and maintenance. In this section, we will consider how Marking utility lines is mandatory.
If you are not keeping up with professionals, you will do a lot of harm, contributing to the disruption of essential services and impacting industries and societies. You wouldn’t want to do this because the cost is what it means. So, get your project running safely; read the below information; I hope this will take you to through what you are looking for.
Damage To Underground Utilities Due To Excavation:
Several types of utilities present or buried underneath our streets or any area. From a sewer line to a natural gas pipeline, there are varieties of cable & wire(including telephone cable, fiber optic wire, traffic signal, and many more).
In general, there are two different types of utility lines: transmission (transmitting of large quantities of natural gas, fuel, or electricity between utility installations; sometimes massive density under high pressure) or distribution (powertrain of vast volumes of natural gas, energy, or electricity between utilities). Since these lines can be dangerous if they are damaged. Before starting any project, it is vital to locate such lines to avoid uncertainties.
The cables & wires are not always under some public right-of-way. Transmission systems also pass across private lands. Established areas also have an underground labyrinth of numerous government and utility networks, and rural areas may have buried transmission and communication lines.
Therefore, it is essential to keep a few things in mind before going for any excavation work.
Step 1: Locating Utilities
If the property on which your facility exists has not been tested yet, utilities must be located immediately. Checking underground infrastructure before you start a new construction should be a must if you are in the construction sector. It is recommended that you schedule at least two or three workdays before beginning construction work.
Step 2: Wait Until Marking is Done
If you notice that your excavation area is above underground utilities, connect with the professionals to help you with the right information on marking utilities. You have to wait until this inspection period is done.
Step 3: Inspection and Confirmation
The professionals make an appointment to visit the construction site or facility after contacting them. Such inspectors will flag the places where utilities are present. Until digging, check that you have reached all the relevant utility operators. Always check for markings like utility hole covers or aunty other indicators.
Step 4: Sustainability
A successful step is to ensure people know where all these utilities locate to get long-term markers. It is also necessary to take pictures or establish an exact graph, such as the break room or the safety board, to be kept extremely visible everywhere. This action will ensure workers and managers know where to go when checking for underground utilities before the next project.
Connect with the best Utility Locators
Utility locators are tools that are used to locate underground and buried utilities. Whenever you are thinking of starting any digging work, it is essential to consult with reliable Utility line locators. Whether you seek the “marking utility lines” or any other finding underground utilities, you can connect with us. We at Line Locators promote safer excavation by providing the best information. We avoid necessary costs. Call us today!