How do Utility Locating Services Function? What Factors Affect It?

When a site visit is scheduled, a skilled utility locator will come to your location to determine if a full locate is possible given the current conditions. Locating services will help them to easily locate the selected area. If the conditions are suitable, the ground-penetrating radar will be utilized to scan the ground surface and detect the location of an object. This information is then recorded or mapped to produce a clear picture of regions to avoid when excavating or doing other invasive groundwork.

What exactly is utility locating and how does it work?

The discovery of underground utilities and other subsurface findings using ground-penetrating radar and related instruments is known as utility locating. Utilities and other discoveries can be identified and labeled in a safe and non-destructive manner.

What kinds of services can be found?

Electric, steam, communications, water, gas & oil, sewer & storm, and a variety of additional major and secondary utility services can all be detected using locating services.

What effect does the surface area have on utility location?

Private utility locating equipment is used to scan the surface of the earth to see what’s beneath it. While the size of the surface area can affect the length of time it takes to complete a scan, the number of subsurface results has a higher impact.

The weather has an impact on where utilities are located

The accuracy of GPR and other utility locating devices is affected by weather conditions. The equipment has a tougher time picking up a signal when it is wet. In wet or snowy weather, doing a utility locate may be impossible. An expert worker will be able to tell if the conditions are suitable for locating utilities.

Other elements that influence utility placement

Before executing a utility locate, consider the topography and conditions of the ground. for example, the weather, the type of utility being located, and the depth of the area.


GPR professionals with experience will be able to tell if the conditions are suitable for utility locating services. Hopefully, this guide will help you in finding the best utility services in your area.

What is the Accuracy of Water Leak Detection?

Water leak detection is a precise method of locating water leaks in your home. Leak detection can have an accuracy rate of up to 90% when using modern equipment.

Because of the high accuracy rate, your home will sustain less damage and you will be able to resolve the plumbing issue as quickly as possible.

Why is it critical to notice a water leak as soon as possible?

There are several reasons why early detection of a water leak is critical. A water leak can cause a lot of harm to your property if left unattended. From decaying wood and stained carpets to burst pipes and electrical problems, there’s a lot that can go wrong.

This form of harm is not only expensive but also dangerous. The sooner a leak is discovered, the more likely it is to be repaired at a lesser cost.

Is there a slab leak?

A leak in the pressurized freshwater pipes delivering water to all of your home’s faucets

What can be done about it?

  • The first method for repairing a leak is to jackhammer the concrete slab, dig down to the pipe, and repair it.
  • The second choice is to drill a tunnel beneath the slab all the way to the leaks sourced from the outside.
  • The final option is to remove the leaking line from beneath the slab and replace it with a new line that runs through the wall/attic.
  • The final option is to use an existing copper line as a sleeve and run a new line through it.

Symptoms of a Main-line leak

The longer your water line is broken, the more likely it is that damage will spread throughout the entire system. If you have a main line leak, don’t hesitate to call a plumber.

  1. Water Puddles
  2. Hissing, Whistling, or Bubbling Sounds
  3. Low Water Pressure
  4. Unexpected Water Bill Increase
  5. Water Damage on the Ceiling and Walls
  6. Mold & Mildew Presence
  7. Discolored Water


You can take some precautions to ensure that problems do not emerge, potentially preventing the need for pipe replacement. A routine inspection or water leak detection by our line locators might help you keep track of your finances.